REDUCED Shipping Container Paint & Skip Paint Direct To Metal Primer Finish

Guard SCF - Single Coat Primer Finish. Single Pack Direct to Metal Alkyd Based Resin Primer Finish for Agricultural, Appliance and Machinery Applications.

Discounted due to old stock, the paint is new and unused even if the tin itself doesn't appear to be. Please note that colours available on this listing are approx and not exact.

Quality Single Coat Finish Metal Paint. Matt, Satin and Gloss Finishes. Alkyd Based Resin Primer Finish. Apply by Brush, Roller or Spray. Touch Dry in 2 Hours!

Zinc Phosphate based high build primer finish to be used on prepared steel or previously painted surfaces (always to a test patch). Available in any RAL / BS / NCS / Pantone colours. Not the product you need?

As a high quality single coat finish for application onto mild steel and other suitably prepared surfaces. Ideal for applications which require a fast turnaround, such as manufacturers of modular components and other OEM companies. Please refer to the product Data Sheet for more uses. Further Details and Technical Data.

Designed as a'OneCoat' primer/finish, though is compatible with most single component primers, such as Guard GIP or Guard EP. Likewise can be overcoated with alkyd topcoats such as Guard FEB or Guard FES. Metres/litre at 60 microns dry film thickness.

Ensure surfaces are clean, dry and free from grease and other contamination before coating. Thoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of the coating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5. Complex structures may be more effectively cleaned by HPWJ (high pressure water jetting).

May cause an allergic skin reaction. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.